Article citationsMore>>

Konan, K.L., Peyratout, C., Bonnet, J.-P., Smith, A., Jacquet, A., Magnoux, P. and Ayrault, P. (2007) Surface Properties of Kaolin and Illite Suspensions in Concentrated Calcium Hydroxide Medium. Journal of Colloid and Interface Science, 307, 101-108.
https://doi.org/10.1016/j.jcis.2006.10.085

has been cited by the following article:

• TITLE: Structural and Thermomechanical Study of Plastic Films Made from Cassava-Starch Reinforced with Kaolin and Metakaolin

  AUTHORS: Namory Meite, Léon Koffi Konan, Drissa Bamba, Bi Irié Hervé Goure-Doubi, Samuel Oyetola

  KEYWORDS: Cassava Starch, Plastic Films, Kaolin, Metakaolin, Stress at Break, Young’s Modulus

  JOURNAL NAME: Materials Sciences and Applications, Vol.9 No.1, January 5, 2018

  ABSTRACT: The structural and thermomechanical properties of starch-based plastic films reinforced with kaolin and metakaolin have been studied by various techniques (X-ray diffraction, IR-TF spectroscopy, scanning electron microscopy, tensile tests, and thermal resistance). The results obtained showed that kaolin, an inert material, prevents the starch from losing its granular structure and to solubilize during the heating, generating plastic films of low Young’s modulus (7 MPa). On the other hand, metakaolin, an amorphous and dehydroxylated material obtained after heating of kaolin at 700°C for 1 hour, substantially improves the thermomechanical properties of the plastic films. The Young’s modulus increases from 19 MPa to 25 MPa while the thermal resistance increases from 90°C to 120°C. This was attributed to good dispersion of the metakaolin in the polymer matrix after the loss of the granular structure of the starch during heating.