Article citationsMore>>

Bujtár, P., Sándor, G.K., Bojtos, A., Szucs, A. and Barabás, J. (2010) Finite Element Analysis of the Human Mandible at 3 Different Stages of Life. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 110, 301-309.
https://doi.org/10.1016/j.tripleo.2010.01.025

has been cited by the following article:

• TITLE: Topology Optimization and Fatigue Analysis of Temporomandibular Joint Prosthesis

  AUTHORS: Musaddiq A. Al-Ali, Muazez A. Al-Ali, Akihiro Takezawa, Mitsuru Kitamura

  KEYWORDS: Topology Optimization, Temporomandibular Joint, Fatigue, Stress Shielding

  JOURNAL NAME: World Journal of Mechanics, Vol.7 No.12, December 1, 2017

  ABSTRACT: Treatment of bone tumors in the mandible often involves extensive excavation of affected bone, followed by mandibular reconstruction. Prosthetic implants may be needed to restore jaw functionality. The challenges of making prosthetic bone implants include stress shielding and extending the mechanical life of the implant. We have developed a design algorithm to improve the efficiency of prosthesis design. A finite element model of the patient case is constructed from a computer tomography scan, and the computer implements topology optimization techniques to design the prosthesis with limited stress shielding affected by highly biomechanical compatibility. Topology optimization facilitates the design of low weight structures by automatically introducing holes into the structure. This is governed by engineering predetermined constraints to meet certain job specifications. Such a design will be tested for fatigue life before it is ready to be manufactured and used. Topology optimization can be performed as a design process to achieve a final design that takes stress shielding into consideration. The problem of stress shielding is solved by matching the stiffness of the orthopedic implant to the original bone that is being replaced. The material we used was titanium alloy (Ti-6Al-7Nb). Volume fraction of the orthodox implant was used (0.2872 for the studied case) as volume constraints. Compliance of the bulk bone was set as a further constraint to match the stiffness of the bone with the designed structure. Our results show a good life expectancy for the designed parts, with 12% higher life expectancy for stress-based topology optimization than for compliance-based topology optimization.