Article citationsMore>>

Knezic, M., Dokic, B. and Ivanovic, Z. (2011) Increasing EtherCAT Performance Using Frame Size Optimization Algorithm. Proceedings of 16th IEEE Conference on Emerging Technologies for Factory Automation (ETFA), Toulouse, 5-9 September 2011, 1-4.
https://doi.org/10.1109/ETFA.2011.6059157

has been cited by the following article:

• TITLE: A Novel Medium Access Control Protocol for Real-Time Wireless Communications in Industrial Automation

  AUTHORS: Klaus Tittelbach-Helmrich, Najib Odhah, Zoran Stamenković

  KEYWORDS: MAC, WLAN, Latency, Reliability, Real-Time Communications, Industry Automation, Hardware Implementation, SystemC, VHDL

  JOURNAL NAME: International Journal of Communications, Network and System Sciences, Vol.10 No.11, November 29, 2017

  ABSTRACT: In this paper, a novel Medium Access Control (MAC) protocol for industrial Wireless Local Area Networks (WLANs) is proposed and studied. The main challenge in industry automation systems is the ultra-low network latency with a target upper bound in the order of 1 ms while maintaining high network reliability and availability. The novelty of the proposed wireless MAC protocol resides in its similar latency performance as its counterpart in wired industrial LAN. First, the functional design of the MAC protocol is introduced. Then its performance results gained from hardware implementation (SystemC and VHDL) on an FPGA platform are presented. Finally, a real-time communication module which achieves the ultra-low latency required in industrial automation is described.