TITLE:
Optimization of Drilling Parameters by Analysis of Formation Strength Properties with Utilization of Mechanical Specific Energy
AUTHORS:
Afshin Davarpanah, Seyed Mohammad Mehdi Nassabeh, Behnam Mirshekari
KEYWORDS:
Mechanical Specific Energy, Drilling Bit Penetration Rate, Compressive Strength, Statistical Methods
JOURNAL NAME:
Open Journal of Geology,
Vol.7 No.11,
November
9,
2017
ABSTRACT: By increasing the daily needs of human energy, human manipulation of natural energy sources is expanded and encouraged the human society to developing science, knowledge and technology. Mechanical specific energy required energy for drilling the unit of formation volume. This parameter can be used for functional analysis of drilling, drilling bit optimization and investigating of instability has been made during drilling operations. This parameter can be used for decreasing of drilling costs by increasing drilling speed, optimized the useful life of the drilling bit and determine the right time to replace the drilling bit, and in some cases reduced to a minimum amount. In South Pars field in Iran, many wells have been drilled; however detailed statistics processes hadn’t done for optimizing drilling parameters and their impact on mechanical specific energy. By results of these studies, we can analyze performance and drilling parameters such as weight on drilling bit, rotational speed, penetration rate, etc. In the most investigated cases, mechanical specific energy at the final period time of drilling on each wells has been increased gradually due to the speed movement reduction. Although by investigating middle formations in section of 12.25 inch, all existing wells on a platform in one of the phases of Iran’s South Pars field are being studied, which contains formations such as Hith, Surmeh, Neyriz, Dashtak and Kangan. Studies were done in two parts. In the first part, the range of optimized drilling parameters that is increasing drilling speed and reducing the required amount of energy for drilling formation. This process by investigating mechanical specific energy and its relationship with uniaxial compressive strength in five studied formation have been presented. In the second part, correlations to predict the mechanical specific energy in this area by statistical methods by SPSS software, presented and reviewed. Then, by the most appropriate relationship, the most influential drilling parameters on mechanical specific energy have been set. However, for drilling the next wells in this area drilling parameters with the most priority influences on mechanical specific energy, proposed in the optimum range, will be recommended.