Article citationsMore>>

Kolb, J.F., Mohamed, A.-A.H., Price, R.O., Swanson, R.J., Bowman, A., Chiavarini, R.L., Stacey, M. and Schonenbach, K.H. (2008) Cold Atmospheric Pressure Air Plasma Jet for Medical Applications. Applied Physics Letters, 92, 1-3.
https://doi.org/10.1063/1.2940325

has been cited by the following article:

• TITLE: Cold Plasma Jet Construction to Use in Medical, Biology and Polymer Applications

  AUTHORS: Khaled Lotfy

  KEYWORDS: Cold Plasma, Neon Power Supply, Atmospheric Pressure, Plasma Jet

  JOURNAL NAME: Journal of Modern Physics, Vol.8 No.11, October 31, 2017

  ABSTRACT: Cold atmospheric pressure plasma jets were capable of generating cold plasma plumes that were not confined by electrodes, which make them very enticing for biological, medical and polymer applications. During this work, experimental study of a low frequency, atmospheric plasma-jet discharge in nitrogen has been presented. The experimental operation of this device was conducted with commercially neon power supply. The discharge process operated by using nitrogen as input gas with different flow rates. The experimental results showed that the maximum plasma jet length of 7 mm was detected at 3 Kv input voltage corresponding to 14 l/min as a nitrogen flow rate. The effect of distance from nozzle, nitrogen flow rate and input voltage on the plasma temperature was examined. The gas temperature decreased continuously as the flow rate of nitrogen increasing from 2 l/min to 14 l/min at 3 Kv as a fixed input voltage.