Article citationsMore>>

Li, D., Yu, J., Zhou, W., Ji, B., Song, B. and Guo, X. (2015) An Analytical Model for Resonant Frequency of the Split Ring Resonators. 8th Europe, China Millimeter Waves and THz Technology Workshop, Cardiff, 14-15 September 2015, 1-3. https://doi.org/10.1109/UCMMT.2015.7460632

has been cited by the following article:

• TITLE: Patch Antenna Miniaturization Using CSRR

  AUTHORS: Varindra Kumar

  KEYWORDS: DNG Metamaterial, CSRR, 5 GHz, Patch, Spice, Planar, Bend

  JOURNAL NAME: Open Journal of Antennas and Propagation, Vol.5 No.3, September 27, 2017

  ABSTRACT: A novel metamaterial structure has been proposed for Electromagnetic Compatibility (EMC) applications. A patch antenna with dimension of 18 mm × 13.9 mm and resonating at 5 GHz has been designed and the effect of Double Negative (DNG) metamaterial loading for the patch size reduction as well as a lowering in resonance frequency for the fixed size patch antenna has been proposed. A size reduction of 72.5% in the patch antenna has been obtained with the loading of this metamaterial structure and the effect of loading the metamaterial shows that without reducing the size, the patch antenna can work at 3.7 GHz resonance, providing a lowering in resonance frequency by 26%. The metamaterial structure consists of two concentric loops with an outer radius of 3.1 mm. The width of the ring is 1.0 mm and the split is 0.5 mm and has been designed over a 1.57 mm thick Fr4 substrate. The bending effect of the patch antenna with and without metamaterial loading and its comparison with the planar patch antenna has been also shown here. The metamaterial structure has shown its resonance at 5 GHz and its permittivity and permeability behavior over the desired frequency range has been plotted. The simulation of traditional patch antenna and patch antenna over metamaterial has been compared for its return loss, VSWR, gain and efficiency. Finally, a spice circuit for the S parameter of the metamaterial, patch antenna and patch antenna loaded with metamaterial has been obtained using Matlab and ADS for its equivalence to 3D field solver and its comparison has been plotted for its verification.