Article citationsMore>>

Yang, L., Rida, A., Vyas, R. and Tentzeris, M.M. (2007) RFID Tag and RF Structures on Paper Substrate Using Inkjet-Printing Technology. IEEE Transactions on Microwave Theory and Techniques, 55, 2894-2901.
http://ieeexplore.ieee.org/document/4383080/ https://doi.org/10.1109/TMTT.2007.909886

has been cited by the following article:

• TITLE: Investigation and Comparison of 2.4 GHz Wearable Antennas on Three Textile Substrates and Its Performance Characteristics

  AUTHORS: M. I. Ahmed, M. F. Ahmed, A. A. Shaalan

  KEYWORDS: Wearable Antenna, Textile Material, Ring Resonator Method, DAK Equipment, Antenna Bending

  JOURNAL NAME: Open Journal of Antennas and Propagation, Vol.5 No.3, September 25, 2017

  ABSTRACT: In this paper, two different methods were used for investigating the RF characteristics of three types of textile materials. Goch, Jeans and Leather substrates were studied. A microstrip ring resonator method and DAK (Dielectric Assessment Kit) method were used. Bluetooth antennas were designed and fabricated using these substrates. The results were compared for the two methods. The bending effect of these antennas on its impedance characteristics due to human body movements was also studied. Finally, all antennas were simulated by CST simulator version 2016, fabricated using folded cupper and measured by Agilent 8719ES VNA. The measured results agree well with the simulated results.