TITLE:
Fusing Digital Elevation Models to Improve Hydrological Interpretations
AUTHORS:
Shane Furze, Jae Ogilvie, Paul A. Arp
KEYWORDS:
DEM Fusion, LiDAR-Based Calibration, Hydrographic Interpretations, Stream Network, Wet-Areas Mapping
JOURNAL NAME:
Journal of Geographic Information System,
Vol.9 No.5,
September
18,
2017
ABSTRACT: Improving the accuracy of digital elevation is essential for reducing hydro-topographic derivation errors pertaining to, e.g., flow direction, basin borders, channel networks, depressions, flood forecasting, and soil drainage. This article demonstrates how a gain in this accuracy is improved through digital elevation model (DEM) fusion, and using LiDAR-derived elevation layers for conformance testing and validation. This demonstration is done for the Province of New Brunswick (NB, Canada), using five province-wide DEM sources (SRTM 90 m; SRTM 30 m; ASTER 30 m; CDED 22 m; NB-DEM 10 m) and a five-stage process that guides the re-projection of these DEMs while minimizing their elevational differences relative to LiDAR-captured bare-earth DEMs, through calibration and validation. This effort decreased the resulting non-LiDAR to LiDAR elevation differences by a factor of two, reduced the minimum distance conformance between the non-LiDAR and LiDAR-derived flow channels to ± 10 m at 8.5 times out of 10, and dropped the non-LiDAR wet-area percentages of false positives from 59% to 49%, and of false negatives from 14% to 7%. While these reductions are modest, they are nevertheless not only consistent with already existing hydrographic data layers informing about stream and wet-area locations, they also extend these data layers across the province by comprehensively locating previously unmapped flow channels and wet areas.