Article citationsMore>>

Afzaal, M., Crouch, D., Malik, M.A., Motevalli, M., O’Brien, P. and Park, J.-H. (2003) Deposition of CdSe Thin Films Using a Novel Single-Source Precursor; [MeCd{(SePiPr2)2N}]2. Journal of Materials Chemistry, 13, 639-640.
https://doi.org/10.1039/b300608p

has been cited by the following article:

• TITLE: Composition and Band Gap Controlled AACVD of ZnSe and ZnSxSe1-x Thin Films Using Novel Single Source Precursors

  AUTHORS: Yousef Alghamdi

  KEYWORDS: Bis(diethyldiselenocarbamato)zinc(II), ZnSe, ZnSSe, AACVD, SEM

  JOURNAL NAME: Materials Sciences and Applications, Vol.8 No.10, September 8, 2017

  ABSTRACT: Polycrystalline thin films of ZnSe and ZnSxSe1-x have been deposited on glass substrates by Aerosol Assisted Chemical Vapour Deposition (AACVD) from bis(diethyldiselenocarbamato)zinc(II) and a 1:1 and 1:0.75 mixtures of bis(diethyldiselenocarbamato)zinc(II) and bis(diethyldithiocarbamato)zinc(II) as precursors. All films were characterized by p-XRD, SEM, EDX, Raman spectroscopy, photoluminescence (PL and UV/Vis spectroscopy. The band gap of pure ZnSe thin films was found to be 2.25 whereas the band gap of ZnSxSe1-x films varied from 2.55 to 2.66 eV depending on the sulfur content in the films. PL emission spectra showed a clear blue shift for ZnSxSe1-x films compared to ZnSe due to the sulphur content in the films which increase the band gap. The band gap of ZnSSe can be controlled by sulfur to selenium ratio in the alloy. The morphology of the ZnSe thin films changed from small randomly shaped crystallites to triangles whereas the morphology of ZnSxSe1-x was mainly based on cuboids.