Article citationsMore>>

R. Zarnetta, D. K?nig, C. Zamponi, A. Aghajani, J. Frenzel, G. Eggeler and A. Ludwig, “R-Phase Formation in Ti39Ni45Cu16 Shape Memory Thin Films and Bulk Alloys Discovered by Combinatorial Methods,” Acta Materialia, Vol. 57, December 2009, pp. 4169-4177. doi:10.1016/j.actamat.2009.05.014

has been cited by the following article:

• TITLE: Martensitic Characterization of the Ti45.3Ni54.7 Melt Spun Alloy

  AUTHORS: Geroge C. S. Anselmo, Walman Benicio de Castro, Carlos J. de Araújo

  KEYWORDS: Shape Memory Ni-Ti Alloy, Rapid Solidification, Martensitic Transformation

  JOURNAL NAME: Materials Sciences and Applications, Vol.2 No.9, September 20, 2011

  ABSTRACT: The ribbons of the Ti45.3Ni54.7 shape memory alloy were prepared through the melt spinning technique. The study was focused on investigating the effect of the rapid solidification and grain size at characteristic start martensitic (Ms), final martensitic (Mf), start austenite (As) and final austenite (Af) transformation temperatures. Changes on martensitic transformation temperatures in Ti45Ni55 melt spun ribbons were observed as grain size is reduced. Results of optical microscopy and differential scanning calorimetry (DSC) were used to associate grain size with transformation temperatures.