Article citationsMore>>

Han, X.-H., Wang, Q., Park, Y.-G., T’Joen, C., Sommers, A. and Jacobi. A. (2012) A Review of Metal Foam and Metal Matrix Composites for Heat Exchangers and Heat Sinks. Heat Transfer Engineering, 33, 991-1009.
https://doi.org/10.1080/01457632.2012.659613

has been cited by the following article:

• TITLE: Radiation Efficiency of Surface Burning on a Foam Metal Matrix with Ceramic Coating

  AUTHORS: Vladimir Shmelev

  KEYWORDS: Burning Device, Metal Foam, Matrix, Radiation, Ceramic Coating

  JOURNAL NAME: Energy and Power Engineering, Vol.9 No.7, July 26, 2017

  ABSTRACT: The modified empirical two-temperature model of surface burning on a foam metal matrix was proposed. The comparative experimental studies of radiation properties of both matrices without and with ceramic coating (alumina) were carried out. Measurement was conducted in different spectral ranges. The experimental results were compared with theoretical calculations. It was shown that the integral radiation efficiency of the matrix with ceramic coating was comparable with radiation efficiency of the matrix without any coating in the wide range of the firing rate and surpassed it on 30% - 40% at firing rate above 50 W/cm2.