Article citationsMore>>

Grillo, G., Liu, K.M., Jiang, Z.Y., Zhao, J.W., Zou, J., Lu, L. and Lu, D.P. (2015) Thermal Stability and Properties of Deforma-tion-Processed Cu-Fe in situ Composites. Metall. Mater. Trans. A, 46, 2255-2261. https://doi.org/10.1007/s11661-015-2791-x

has been cited by the following article:

• TITLE: Evolution of Microstructure in a Cu-Cr in situ Composite Produced by Thermo-Mechanical Processing

  AUTHORS: Keming Liu, Deping Lu, Kai Fu, Peilan Luo, Zhikai Huang, Wei Guo, Jiuming Yu, Jin Zou, Qiang Hu

  KEYWORDS: Cu-Cr, in situ Composite, Evolution, Microstructure, Thermo-Mechanical Processing

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.5 No.7, July 7, 2017

  ABSTRACT: This paper studied the microstructure evolution of a deformation-processed Cu-7Cr in situ composite prepared by thermo-mechanical processing. The longitudinal and transverse sectional microstructures were analyzed using an optical microscope and a scanning electronic microscope. In the longitudinal section, the initially randomly distributed Cr dendrites in the as-cast Cu-7Cr alloy were transformed into the fibres aligned parallel to the drawing axis; the Cr dendrites experienced breaking, flattening and rotating, lapping and merging, and homogenizing and refinement during thermo-mechanical processing. In the transverse section, the initially randomly distributed Cr dendrites in the as-cast Cu-7Cr alloy were changed into the curvy ribbon like fibres; the Cr dendrites underwent breaking, flattening and rotating, folding and twisting, and irregularizing and refinement during thermo-mechanical processing.