Article citationsMore>>

Karimi, H., Ghaedi, M., Shokrollahi, A., Rajabi, H.R., Soylak, M. and Karami, B. (2008) Development of a Selective and Sensitive Flotation Method for Determination of Trace Amounts of Cobalt, Nickel, Copper and Iron in Environmental Samples. Journal of Hazardous Materials, 151, 26-32.
https://doi.org/10.1016/j.jhazmat.2007.05.051

has been cited by the following article:

• TITLE: Development of a Combined Flotation and High Pressure Leaching Process for Copper and Nickel Recovery from Mine Tailing

  AUTHORS: Refilwe Sandra Magwaneng, Altansukh Batnasan, Kazutoshi Haga, Atsushi Shibayama

  KEYWORDS: Mine Tailing, Flotation, High Pressure Leaching, Copper, Nickel

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.3, May 26, 2017

  ABSTRACT: The present study focused on the re-processing of copper and nickel from mine tailings. In this work, recovery of copper and nickel from mine tailing by combined process of flotation and high pressure oxidative leaching were considered. In the first stage, effects of flotation parameters including collector type, collector dosage, and pH and pulp density were examined. The results showed that over 80% copper recovery was achieved under the optimized flotation conditions while nickel recovery was lower than 30% due to its co-ex-istence with gangue minerals of pyrrhotite, pyrite and other clay minerals. In the second stage, key parameters, particularly concentration of sulfuric acid, temperature, pressure and leaching time were investigated to test the leaching efficiency of copper and nickel from the flotation concentrate with high pressure oxidative leaching (HPOL). A comparison was made between the leaching efficiencies of copper and nickel from flotation concentrates and mine tailing.