Article citationsMore>>

Liu, X., Zhu, Z.Q., Hasegawa, M., Pride, A., Deohar, R., Maruyama, T. and Chen, Z. (2011) DC-link Capacitance Requirement and Noise and Vibration Reduction in 6/4 Switched Reluctance Machine with Sinusoidal Bipolar Excitation.2011 IEEE Energy Conversion Congress and Exposition (ECCE 2011), Phoenix, 17-22 September 2011, 1596–1603.
https://doi.org/10.1109/ECCE.2011.6063973

has been cited by the following article:

• TITLE: Analysis and Comparison of Power Electronic Converters for Conventional and Toroidal Switched Reluctance Machines

  AUTHORS: Zipan Nie, Nigel Schofield

  KEYWORDS: Power Electronic Converter, Conventional Switched Reluctance Machine, Toroidal Switched Reluctance Machine

  JOURNAL NAME: Energy and Power Engineering, Vol.9 No.4, April 26, 2017

  ABSTRACT: Different power electronic converter topologies are introduced in this paper for both Conventional Switched Reluctance Machine (CSRM) and Toroidal Switched Reluctance Machine (TSRM) drive systems. Their commutation, switch and diode currents, power losses, and efficiencies under over modulation operation are analyzed and compared for converter characteristics study, performance evaluation and topology selection for CSRM and TSRM drive systems. The switch and diode silicon volumes required for each CSRM and TSRM drives are also compared according to their corresponding currents at the equivalent machine torque versus speed operating points.