TITLE:
On-Site Calibration Method of Dosimeter Based on X-Ray Source
AUTHORS:
Wenhui Lv, Huiping Guo, Ning Lv, Chenyang Tian, Kuo Zhao, Xiaotian Wang, Yijie Hou
KEYWORDS:
X Ray Source, On-Site Calibration, Energy Response, Gamma Radiation Dosimeter
JOURNAL NAME:
World Journal of Nuclear Science and Technology,
Vol.7 No.2,
April
20,
2017
ABSTRACT: The real-time monitoring of environmental radiation dose for nuclear fa-cilities is an important part of safety, in order to guarantee the accuracy of the monitoring results regular calibration is necessary. Around nuclear facilities there are so many environmental dosimeters installed dispers-edly, because of its huge quantity, widely distributed, and in real-time monitoring state; it will cost lots of manpower and finance if it were tak-en to calibrate on standard laboratory; what’s more it will make the en-vironment out of control. To solve the problem of the measurement ac-curacy of the stationary gamma radiation dosimeter, an on-site calibra-tion method is proposed. The radioactive source is X-ray spectrum, and the dose reference instrument which has been calibrated by the national standard laboratory is a high pressure ionization. On-site calibration is divided into two parts; firstly the energy response experiment of dosim-eter for high and low energy is done in the laboratory, and the energy response curve is obtained combining with Monte Carlo simulation; sec-ondly experiment is carried out in the field of the measuring dosimeter, and the substitution method to calibrate the dosimeter is used; finally the calibration coefficient is gotten through energy curve correction. In order to verify the accuracy of on-site calibration method, the calibrated dosimeter is test in the standard laboratory and the error is 3.4%. The re-sult shows that the on-site calibration method using X-ray is feasible, and it can improves the accuracy of the measurement results of the stationary γ-ray instrument; what’s more important is that it has great reference value for the radiation safety management and radiation environment evaluation.