Article citationsMore>>

Ishikawa, T., Yamaoka, H., Harada, Y., Fujii, T. and Nagasawa, T. (2002) A General Process for in Situ Formation of Functional Surface Layers on Ceramics. Nature, 416, 64-67. https://doi.org/10.1038/416064a

has been cited by the following article:

• TITLE: Preparation and Characterization of Axial Gradient Silicon Carbide Fibers with Sinusoidal Electrical Resistivity

  AUTHORS: Tianjiao Hu, Xiaodong Li, Wenjing Pu, Zhenyu Xia

  KEYWORDS: Silicon Carbide, Fiber, Electrical Property, Sinusoidal

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.4 No.12, December 9, 2016

  ABSTRACT: Two types of silicon carbide fibers with sinusoidal electrical resistivity were prepared by using different pyrolysis technology. The relationship between the microstructure and the electrical resistivity of these fibers was investigated and compared. The results indicated that carbon layer was the main conductive phase in the SiC fibers obtained by means of one step pyrolysis, whereas a free carbon phase governed the conductivity of the SiC fibers prepared through two step pyrolysis mode.