Article citationsMore>>
Georgiev, D.G., Sultana, T., Mian, A., Auner, G., Herfurth, H., Witte, R. and Newaz, G. (2005) Laser Fabrication and Characterization of Sub-Millimeter Joints between Polyimide and Ti-Coated Borosilicate Glass. Journal of Materials Science, 40, 5641-5647.
https://doi.org/10.1007/s10853-005-1291-6
has been cited by the following article:
-
TITLE:
Transient Thermal Modeling in Laser Welding of Metallic/Nonmetallic Joints Using SolidWorks® Software
AUTHORS:
Fredrick Madaraka Mwema
KEYWORDS:
SolidWorks®, Laser Welding, Joining, Temperature Field, Metals/Nonmetals, Transient Thermal Modeling
JOURNAL NAME:
International Journal of Nonferrous Metallurgy,
Vol.6 No.1,
January
31,
2017
ABSTRACT: The purpose of this research is to develop a SolidWorks? model for transient temperature field of laser welding of PMMA/SS 304 materials
for application in fabrication of the ultrasonic back-plate, with a view of
optimizing the experimental conditions. The study is carried out on these
materials because of the increasing application of both metals and non-metals.
The work focuses specifically on these materials because they have been
experimentally studied previously and as such, this study can be accepted as an
assessment into feasibility of using SolidWorks? model to study the temperature field of the laser welding processes of metals
and non-metals. The results of the SolidWorks? transient thermal model show that there is a concentration of high temperatures
at the point of contact. It also shows that temperature decreases as we move in
(between laser and the top face) to the thickness of the part. Additionally the
maximum temperature occurs at the last point of the welding; this may be due to
the accumulation of the temperature before arriving at the end. These findings
are comparable to the previous simulated and experimental results on
temperature field during laser welding of PMMA/SS 304 materials. However, SolidWorks? is shown to present a challenge in modeling a moving source of laser power.