Article citationsMore>>

Anai, S., Arimura, H., Nakamura, K., Araki, F., Matsuki, T., Yoshikawa, H., Yoshidome, S., Shioyama, Y., Honda, H. and Ikeda, N. (2011) Estimation of Focal and Extra-Focal Radiation Profiles Based on Gaussian Modeling in Medical in Medical Linear Accelerators. Radiological Physics and Technology, 4, 173-179.
https://doi.org/10.1007/s12194-011-0118-1

has been cited by the following article:

• TITLE: Direct Measurement of Medical Linear Accelerator Electron Beam Width at Scattering Foil Position

  AUTHORS: Tomohiro Shimozato, Yuichi Aoyama

  KEYWORDS: Medical Linear Accelerator, Electron Beam Distribution, Radiochromic Film, Scattering Foil

  JOURNAL NAME: International Journal of Medical Physics, Clinical Engineering and Radiation Oncology, Vol.6 No.1, February 24, 2017

  ABSTRACT: Purpose: The aim of this study was to develop a method for the direct measurement of electron beam width and distribution at the scattering foil on the carrousel in a medical linear accelerator gantry head, which differs from an existing indirect method for measuring the focal spot size using a camera or metallic slit located outside the gantry head. Methods: The electron beam emitted by the linear accelerator was used to irradiate radiochromic film mounted on the scattering foil on the carrousel, which was not used for clinical treatment. The electron beam width at the scattering foil position was then evaluated using the full width at half maximum of the Gaussian distribution approximated from each one dimensional distribution of the irradiated radiochromic film. Results: The electron beam width at the scattering foil position was found to be 3.1 to 6.4 mm in the crossline direction and 2.8 to 5.5 mm in the inline direction with electron energy of 4 to 16 MeV. The two-dimensional distribution of the electron beam was therefore elliptical or distorted in shape, not circular. Conclusions: Direct measurement of the electron beam width at the scattering foil in the carrousel of a medical linear accelerator is possible, though the use of lower sensitivity film in addition to indirect methods is expected to bring about better results. However, as this method does not allow for direct measurement of the incident angle of the accelerated electron beam, further improvements and refinements are still needed.