TITLE:
Modified Single Phase SRF d-q Theory Based Controller for DVR Mitigating Voltage Sag in Case of Nonlinear Load
AUTHORS:
Dhiraj N. Katole, Manoj B. Daigavane, Snehal P. Gawande, Prema M. Daigavane
KEYWORDS:
Power Quality, Voltage Sag, DVR, Single Phase SRFT Based Controller, Sinusoidal Pulse Width Modulation, Non-Linear Load
JOURNAL NAME:
Journal of Electromagnetic Analysis and Applications,
Vol.9 No.2,
February
7,
2017
ABSTRACT: This paper mainly concentrates on design of improved controller and its implementation based on single phase synchronous reference frame theory (SRFT) for Dynamic Voltage Restorer (DVR) compensating voltage sag particularly for nonlinear load. In case of single phase distribution line with nonlinear load, the complexity of controller’s design becomes more serious issue. The present single phase and/or three phase theories applicable to DVR shows poor response to restore voltage sag in case of nonlinear load due to presence of harmonics. Hence restoration of voltage sag in single phase nonlinear load connected system has been a serious concern. Therefore, new controller for DVR has been proposed incorporating effective design concept for fundamental component extraction in case of nonlinear load. The single phase SRFT based main controller for DVR works on two separate closed path viz. feed forward path for quick transient response and feedback path for reducing the steady state error. Moreover, pre-sag mitigation strategy of DVR has been adapted through these two aforementioned paths. Complete design of proposed controller is based on phasor analysis. It also consist of proportional integral (PI) controller to reduce the error in the DC-link voltage during compensation time. The controller performance has been verified in MATLAB Simulink for both types (linear and nonlinear) of load. The results obtained indicates that the proposed controller is effective in its performance.