Article citationsMore>>

Drab, D.M., Willauer, H.D., Olsen, M.T., Ananth, R., Mushrush, G.W., Baldwin, J.W., Hardy, D.R. and Williams, F.W. (2013) Hydrocarbon Synthesis from Carbon Dioxide and Hydrogen: A Two-Step Process. Energy Fuels, 27, 6348-6354.
https://doi.org/10.1021/ef4011115

has been cited by the following article:

• TITLE: An Introductive Study about CO2 Hydrogenation into Hydrocarbons Using Iron Catalysts

  AUTHORS: Wensheng Ning, Chunhua Chen, Tianqi Wang, Yangfu Jin, Xiezhen Yang

  KEYWORDS: CO2 Hydrogenation, Hydrocarbon Synthesis, Iron Catalyst

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.7 No.1, December 21, 2016

  ABSTRACT: CO2 hydrogenation reaction was performed on precipitated iron catalysts which were promoted by Si, Zn, K and Cu. The optimum SiO2 content in the catalysts is about 15 wt% relative to Fe2O3 mass. With reaction temperature raised, CO2 conversion is increased continually, but CO and CH4 selectivity only fluctuate in a narrow range which is beneficial to the synthesis of C2+ hydrocarbons. Two kinds of catalyst filling constitution were experimentally compared in order to increase the yield of C5+ hydrocarbons.