Article citationsMore>>

Veale, M.C., Bell, S.J., Duarte, D.D., French, M.J., Schneider, A., Seller, P., Wilson, M.D., Lozinskaya, A.D., Novikov, V.A., Tolbanov, O.P., Tyazhev, A. and Zarubin, A.N. (2014) Chromium Compensated Gallium Arsenide Detectors for X-Ray and γ-Ray Spectroscopic Imaging. Nuclear Instruments and Methods in Physics Research Section A, 762, 6-14.
http://dx.doi.org/10.1016/j.nima.2014.03.033

has been cited by the following article:

• TITLE: Dark Current Compensation and Sensitivity Adjustment on Gallium Arsenide Linear Array Detector for X-Ray Imaging

  AUTHORS: Mikhail Polkovnikov

  KEYWORDS: Linear Array, Gallium Arsenide, Calibration, Dark Current, Sensitivity, Modular Transfer Function, Normalized Noise Power Spectrum

  JOURNAL NAME: Journal of Biomedical Science and Engineering, Vol.9 No.11, October 31, 2016

  ABSTRACT: For the last several years, the linear array x-ray detector for x-ray imaging with gallium arsenide direct conversion sensitive elements has been developed and tested at the In-stitute for High Energy Physics. The array consists of 16 sensitive modules. Each module has 128 gallium arsenide (GaAs) sensitive elements with 200 μm pitch. Current article describes two key program procedures of initial dark current compensation of each sensitive element in the linear array, and sensitivity adjustment for alignment of strip pattern in the raw image data. As a part of evaluation process a modular transfer function (MTF) was measured with the slanted sharp-edge object under RQA5 technique as it described in the International Electrotechnical Commission 62220-1 standard (high voltage 70 kVp, additional aluminium filter 21 mm) for images with compensated dark currents and adjusted sensitivity of detector elements. The 10% level of the calculated MTF function has spatial resolution within 2 - 3 pair of lines per mm for both vertical and horizontal orientation.