TITLE:
Design and Performance Evaluation of Piezo-Driven Synthetic Jet Devices
AUTHORS:
M. Chiatto, L. de Luca
KEYWORDS:
Synthetic Jets, Flow Control, Lumped Element Model
JOURNAL NAME:
World Journal of Engineering and Technology,
Vol.4 No.3D,
October
20,
2016
ABSTRACT: In the last two decades synthetic jet actuators have gained much interest among flow control techniques due to their short response time, high jet velocity and absence of traditional piping, that matches the requirements of reduced size and low weight. A synthetic jet is generated by the diaphragm oscillation (generally driven by a piezo- electric element) in a relatively small cavity, producing periodic cavity pressure variations associated to cavity volume changes. The high pressure air exhausts through an orifice, converting membrane elastic energy in jet kinetic energy. This review paper faces the development of various lumped-element models (LEM) as practical tools to design and manufacturing actuators. LEM can predict quickly device performances such as frequency response in terms of membrane displacement, cavity pressure and jet velocity, as well as efficiency of energy conversion of input Joule power into useful kinetic power of air jet. Actuator performance is analyzed also by varying typical geometric parameters such as cavity height and orifice diameter and length, through a proper dimensionless form of the governing equations.