TITLE:
Effect of Reinforcement on Deflection and Cracks in Baked Clay Beams Subjected to Impact Loading
AUTHORS:
Nawab Ali Lakho, Muhammad Auchar Zardari
KEYWORDS:
Reinforced Baked Clay, Impact Load, Deflection, Cracks, Compressive Strength
JOURNAL NAME:
Engineering,
Vol.8 No.10,
October
12,
2016
ABSTRACT: Attempts are being made to utilize Reinforced Baked Clay (RBC) as a substitute of Reinforced Cement Concrete (RCC) for construction of low cost houses in plains of Pakistan. Since baked clay is considered to be more brittle as compared to concrete. Therefore, it is necessary to investigate how deflection and crack width of RBC beams subjected to impact loading are governed by amount of reinforcement. This paper presents the behaviour of RBC beams under drop weight impact loading. The beams were reinforced with two steel bars, one in compression zone and the other in tension zone. In group A beams, the diameter of steel bars was 12.7 mm, while the beams of group B were reinforced with steel bars of 15.8 mm diameter. The RBC beams were subjected to repeated impacts of a hammer of mass 21 kg falling from a height of 1000 mm. The results show that 1) three times reduction in deflection, and 2) 2.5 times decrease in crack width, were achieved in RBC beams by increasing the area of steel to 50%. In addition to this, all the RBC beams failed within nine blows of the hammer, irrespective of area of reinforcement.