Article citationsMore>>

Sammartano, V., Aricò, C., Carravetta, A., Fecarotta, O. and Tucciarelli, T. (2013) Banki- Michell Optimal Design by Computational Fluid Dynamics Testing and Hydrodynamic Analysis. Energies, 6, 2362-2385.
http://dx.doi.org/10.3390/en6052362

has been cited by the following article:

• TITLE: An Investigation on the Flow Characteristics in the Cross-Flow Turbine-T15 300

  AUTHORS: Isack Amos Legonda

  KEYWORDS: Cross-Flow Turbine, CFD, Hydropower

  JOURNAL NAME: Journal of Power and Energy Engineering, Vol.4 No.9, September 14, 2016

  ABSTRACT: A study on the flow characteristics in the cross-flow turbine model T15 300 has been conducted. The study was designed to examine the fluid flow trajectory in the turbine and identify areas for further improvement. Computational fluid dynamics (CFD) approach was employed and the results were compared with experimental data. The simulation study was conducted at guide vane angle of 20o, 30o, 35o and 41o. The shaft diameter was set at 30 mm, 45 mm, 60 mm, and 75 mm for each head while the head was maintained at 50 m. The flow characteristics were determined using particles trajectory. The research findings showed that the optimal vane angle and shaft diameter for cross-flow turbine were 41o and 45 mm respectively. These results are in good agreement with experimental data from previous studies.