Article citationsMore>>

CIGRE WG 13.04, “Requirements for testing making performance of high-voltage circuit breakers at reduced applied voltage,” Electra, Vol. 163, No. 6, pp. 27–33. 1979.

has been cited by the following article:

• TITLE: Design of a Control Device for Synthetic Making Test Based on Pre-Arcing Current Detection and Phase Control

  AUTHORS: Zhengyang ZHOU, Minfu LIAO, Xingming FAN

  KEYWORDS: Synthetic Making Test, Pre-Arcing Current, Phase Control

  JOURNAL NAME: Journal of Electromagnetic Analysis and Applications, Vol.1 No.4, December 31, 2009

  ABSTRACT: The synthetic making test has been widely used in evaluating the break ability of high-voltage circuit breaker. However, the test research and application are still inadequate, especially in the condition of rated voltage. According to the realistic conditions of test stations in China, a control device based on pre-arcing current detection and phase control is proposed in this paper. A sample of the control device made up of DSP TMS320LF2407A is fabricated, in which the CPLD MAX7064 is used to transmit signals for EMC design. It can be applied in full voltage synthetic making test at a level of 126kV/63kA. The test results show that, it is accurate to control the making phase of the applied voltage, whether the closing is demanded at voltage peak or zero.