Article citationsMore>>

Ganjali, M.R., Poursaberi, T., Babaei, L.H., Rouhani, S., Yousefi, M., Kargar-Razi, M., Moghimi, A., Aghabozorg, H. and Shamsipur, M. (2001) Highly Selective and Sensitive Copper(II) Membrane Coated Graphite Electrode Based on a Recently Synthesized Schiff’s Base. Analytica Chimica Acta, 440, 81-87.
http://dx.doi.org/10.1016/S0003-2670(01)01051-0

has been cited by the following article:

• TITLE: Novel Screen-Printed All-Solid-State Copper(II)-Selective Electrode for Mobile Environmental Analysis

  AUTHORS: Johannes Schwarz, Kathrin Trommer, Michael Mertig

  KEYWORDS: All-Solid-State Copper(II)-Selective Electrode, Conducting Polymers, Potentiometric Titration, Environmental Samples

  JOURNAL NAME: American Journal of Analytical Chemistry, Vol.7 No.7, June 30, 2016

  ABSTRACT: Based on poly(vinyl chloride) membranes, a novel miniaturized screen-printed all-solid-state copper(II)-selective electrode has been developed for applications in environmental monitoring. Performance and applicability of the ion-selective electrode (ISE) have been proved by potentiometric investigations. Conducting polymers were used as intermediate layers and as solid contacts between the ion-selective membrane and the graphite transducer. The ion-complexing reagent 2-mercapto-benzoxazole was incorporated into poly(vinyl chloride) membranes. In the concentration range 10-6 - 10-2 mol/L, the ISE exhibited a linear Nernstian potential response to copper(II) with an average slope value of 28 mV/decade. The detection limit was 3 × 10-7 mol/L. The electrode exhibits a short response time ( electrode has also successfully been used in potentiometric, complexometric titrations with ethylenediaminetetraacetic acid.