Article citationsMore>>

Hwang, D.-H., Youn, Y.-W., Sun, J.-H., Choi, K.-H., Lee, J.-H. and Kim, Y.-H. (2015) Support Vector Machine Based Bearing Fault Diagnosis for Induction Motors Using Vibration Signals. Journal of Electrical Engineering and Technology, 10, 1558-1565.
http://dx.doi.org/10.5370/JEET.2015.10.4.1558

has been cited by the following article:

• TITLE: An Effective Detection of Inrush and Internal Faults in Power Transformers Using Bacterial Foraging Optimization Technique

  AUTHORS: M. Gopila, I. Gnanambal

  KEYWORDS: Power Transformer, Inrush, Internal Fault, Hyperbolic S-Transform, Bacteria Foraging Optimization

  JOURNAL NAME: Circuits and Systems, Vol.7 No.8, June 15, 2016

  ABSTRACT: Power transformers in transmission network are utilized for increasing or decreasing the voltage level. Power Transformers fail to connect directly to the consumers that result in the less load fluctuations.Power transformer operation under any abnormal condition decreases the lifetime of the transformer.Power Transformer protection from inrush and internal fault is critical issue in power system because the obstacle lies in the precise and swift distinction between them. Due to the limitation of heterogeneous resources, occurrence of fault poses severe problem. Providing an efficient mechanism to differentiate between faults (i.e.inrush and internal) is the key for efficient information flow. In this paper, the task of detecting inrush and internal fault in power transformers is formulated as an optimization problem which is solved by using Hyperbolic S-Transform Bacterial Foraging Optimization (HS-TBFO) technique. The Gaussian Frequency- based Hyperbolic S-Transform detects the faults at much earlier stage and therefore minimizes the computation cost by applying Cosine Hyperbolic S-Transform. Next, the Bacterial Foraging Optimization (BFO) technique has been proposed and has demonstrated the capability of identifying the maximum number of faults covered with minimum test cases and therefore improving the fault detection efficiency in a wise manner. The HS-TBFO technique is evaluated and validated in various simulation test cases to detect inrush and internal fault in a significant manner. This HS-TBFO technique is investigated based on three phase power transformer embedded in a power system fed from both ends. Results have confirmed that the HS-TBFO technique is capable of categorizing the inrush and internal faults by identifying maximum number of faults with minimum computation cost as compared to the state-of-the-art works.