Article citationsMore>>

H. A. Acciari, A. C. Guastaldi and C. M. A. Brett, “Corrosion of the Component Phases Presents in High Copper Dental Amalgams. Application of Electrochemical Impedance Spectroscopy and Electrochemical Noise Analysis,” Corrosion Science, Vol. 47, No. 3, March 2005, pp. 635-647. doi:10.1016/j.corsci.2004.07.004

has been cited by the following article:

• TITLE: Study of Corrosion Resistance of Laser Welded Au-Pd-Ag-In Alloy Using Electrochemical Techniques

  AUTHORS: Márcio L. Dos Santos, Heloísa A. Acciari, Carla S. Riccardi, Antonio C. Guastaldi

  KEYWORDS: Laser Welding, Corrosion, Au-Pd-Ag-In, Electrochemical Techniques

  JOURNAL NAME: Materials Sciences and Applications, Vol.2 No.7, July 29, 2011

  ABSTRACT: The aim of this work was to evaluate the corrosion resistance of AuPdAgIn alloy, submitted to laser beam welding, in 0.9% NaCl solution, using electrochemical techniques. Measures of the open circuit potential (OCP) versus time were applied to electrochemical experiments, as well as potentiodynamic direct scanning (PDS) and electrochemical impedance spectroscopy (EIS) on AuPdAgIn alloy, submitted to laser beam welding in 0.9% NaCl solution. Some differences observed in the microstructure can explain the results obtained for corrosion potential, Ecorr, and corrosion resistance, Rp. EIS spectra have been characterized by distorted capacitive components, presenting linear impedance at low frequencies, including a non-uniform diffusion. The area of the laser weld presented corrosion potential slightly superior when compared to the one of the base metal. The impedance results suggest the best resistant corrosion behavior for laser weld than base metal region. This welding process is a promising alternative to dental prostheses casting.