TITLE:
Using Cavitation Peening to Improve the Fatigue Life of Titanium Alloy Ti-6Al-4V Manufactured by Electron Beam Melting
AUTHORS:
Mitsuru Sato, Osamu Takakuwa, Masaaki Nakai, Mitsuo Niinomi, Fumio Takeo, Hitoshi Soyama
KEYWORDS:
Component, Electron Beam Melting, Ti-6Al-4V, Cavitaion Peening, Residual Stress, Fatigue
JOURNAL NAME:
Materials Sciences and Applications,
Vol.7 No.4,
April
20,
2016
ABSTRACT: Although Electron Beam Melting (EBM) is an innovative technology, the fatigue properties of materials manufactured by EBM may be lower than those of casted and wrought materials due to defects and surface roughness. In order to enhance the fatigue life of components or structures manufactured by EBM, a mechanical surface treatment technology, e.g., peening, would be effective because peening introduces high compressive residual stress at the surface which can extend the fatigue life considerably. In the present study, specimens were manufactured by EBM using titanium alloy Ti-6Al-4V powder. Two types of specimens were prepared: as-built and as-machined specimens. Specimens of each type were treated by cavitation peening or shot peening. The fatigue lives of the specimens were evaluated by a plate bending fatigue tester. The residual stress and surface roughness were also evaluated. The results obtained showed that the fatigue strength of as-built specimens can be improved by 21% by cavitation peening or shot peening, and the fatigue life under particular applied stresses can also be extended by 178% by cavitation peening.