Article citationsMore>>

Lin, H.-T., Huang, M.-S., Luo, J.-W., Lin, L.-H., Lee, C.-M. and Ou, K.-L. (2010) Hydrocarbon Fuels Produced by Catalytic Pyrolysis of Hospital Plastic Wastes in a Fluidizing Cracking Process. Fuel Processing Technology, 91, 1355-1363. http://dx.doi.org/10.1016/j.fuproc.2010.03.016

has been cited by the following article:

• TITLE: Catalytic Cracking of Waste Polypropylene in a Nitrogen Fluidized Bed Reactor

  AUTHORS: Anil Vyas, Suresh Kumar Singh, Komal Sharma, Sukhwant Singh

  KEYWORDS: Waste PP, Pyrolysis, Catalytic Cracking, ZSM-5, Zeolite, Liquid Fuel

  JOURNAL NAME: Journal of Geoscience and Environment Protection, Vol.4 No.4, April 11, 2016

  ABSTRACT: Polypropylene (PP) is rated first as volume leader in the plastic sector. Its non-biodegradable property poses serious environmental problem in case of disposal. The catalytic cracking of PP was performed with various catalysts i.e. ZSM-5, Zeolite, RB and SPS. The cracking was observed under different feed to catalyst ratio i.e. 1:1 to 5:1. The fluidized bed reactor was fabricated with arrangement to measure the temperature ranging from 100。C to 800。C. The effective of feed to catalyst ratio was found 3:1 at a temperature range of 420。C - 510。C and catalyst ZSM-5 gives maximum liquid conversion of waste PP. Conversion of PP to liquid fuel will not only resolve the problem of disposal of waste polypropylene plastic but also give a value aided product.