Article citationsMore>>

Canann, S.A., Tristano, J.R. and Staten, M.L. (1998) An Approach to Combined Laplacian and Optimization-Based Smoothing for Triangular, Quadrilateral, and Quad-Dominant Meshes. ANSYS, Inc., Canonsburg, 15317.

has been cited by the following article:

• TITLE: Optimization of Sectional Dimensions of I-Section Flange Beams and Recommendations for IS 808: 1989

  AUTHORS: Himanshu Gaur, Krishna Murari, Biswajit Acharya

  KEYWORDS: Finite Element Analysis, Flange Beam, I-Section, Optimization

  JOURNAL NAME: Open Journal of Civil Engineering, Vol.6 No.2, March 31, 2016

  ABSTRACT: This study covers optimization of I-sectional flange beams. Scope of this study is limited to medium weight flange beams of Table 1 of IS 808:1983 but it can be further extended for the other sections of this code. Best possible geometric shape of the cross-section is found for maximum performance of the beam with minimum material consumption. All possible loading conditions are considered in the study for which a beam in flexure undergoes in its life. ANSYS software program is used for the analysis and optimizing the sections. It is found that sections MB 125, MB 300 and MB 400 of Table 1 of IS 808 are not the optimum sections but other alternative of these cross-sections is available which within the same material consumption performs better than these sections of IS code.