Article citationsMore>>

Andrisano, A.O., Ansaloni, M., Leali, F., Pellicciari, M. and Vergnano, A. (2011) A Novel Method for Sensitivity Analysis and Characterization in Integrated Engineering Design. Proceedings of International Conference Innovative Methods in Product Design, Venice, 15-17 June 2011, 272-279.
http://www.improve2011.it/Full_Paper/87.pdf

has been cited by the following article:

• TITLE: Response Surface Methodology Approach for Transmission Optimization of V-Belt Drive

  AUTHORS: Nurudeen A. Raji, Andrew A. Erameh, Abiodun A. Yussouff, Rasheed O. Durojaye

  KEYWORDS: Pulley, V-Belt, Radius, Power Output, RSM, Optimization

  JOURNAL NAME: Modern Mechanical Engineering, Vol.6 No.1, February 23, 2016

  ABSTRACT: The aim of this study was to develop an efficient and realistic response surface optimization technique for the design of V-belt drive for optimum power output of the drive in machinery design. Optimization mathematical model of the V-belt drive was constructed. The power output of the belt drive was modeled and optimized by the Response Surface Methodology (RSM). Analysis of variance was used to evaluate the extent of influence of each independent variables on the power output response of the belt drive. A RSM optimization process was proposed to calculate optimal power output for V-belt drive given a set of pulley diameter for the drive employed in a tilling machine. The analysis showed that optimum power output of the drive for workshop light operation machinery could be obtained at driving and driven pulley radius range of 550 - 900 mm and 250 - 500 mm. An optimum power output of 1418.76 kW was obtained at driving and driven pulley radius of 846 and 486 mm respectively for a farm tilling machine.