Article citationsMore>>

Davila, D., Esquivel, J., Vigues, N., Sanchez, O., Garrido, L., Tomas, N., Sabate, N., Del Campo, F., Munoz, F. and Mas, J. (2008) Development and Optimization of Microbial Fuel Cells. Journal of New Materials for Electrochemical Systems, 11, 99.

has been cited by the following article:

• TITLE: Composite Mesh Electrodes with Immobilized Bacteria for Bio-Batteries

  AUTHORS: Siddharth Suresh, Richard W. Evitts, Glyn F. Kennell

  KEYWORDS: Stainless Steel Mesh, Immobilized Mediator, Bacteria, Photosynthetic Algae, Battery, Electrochemical Impedance Spectroscopy

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.6 No.1, January 19, 2016

  ABSTRACT: An anode was constructed using a novel technique and subsequently tested in a bio-battery. The anode comprised of a composite electrode coated with immobilized bacteria. The immobilized bacteria used in this study were Escherichia coli K-12. The composite electrode contained three layers: a 304 L stainless steel mesh base, an electro-polymerized layer of pyrrole, and an electro-polymerized layer of methylene blue. The bacteria were immobilized utilizing a technique incorporating a carbon nanoparticle and TeflonTM emulsion. The composite electrode combined with immobilized bacteria was examined whilst incorporated into the anodic chamber of a bio-battery. Different tests were conducted, including Electrochemical Impedance Spectroscopy. Results from these tests were compared with data obtained from alternate configurations and values from the open literature. The maximum power density generated by the composite electrode with immobilized bacteria whilst incorporated into the anodic chamber of a bio-battery was 378 mW/m2. Results demonstrate this composite anode configuration with immobilized bacteria produced approximately 69% more power density and 53% more current density than alternate electrode configurations with bacteria suspended in solution. Also, it was found that a significant portion of the bio-battery’s resistance to charge transfer occurred at the surface of the anode and this resistance was lowered by 51% through bacteria immobilization.