Article citationsMore>>

Gorsse, S., Petitcorps, Y.L., Matar, S. and Rebillat, F. (2003) Investigation of the Young’s Modulus of TiB Needles in Situ Produced in Titanium Composite. Materials Science and Engineering: A, 340, 80-87. http://dx.doi.org/10.1016/S0921-5093(02)00188-0

has been cited by the following article:

• TITLE: Microstructure and Mechanical Properties of NiTi2-TiB Composite Fabricated by Spark Plasma Sintering

  AUTHORS: Masashi Yoshida, Hideo Shiraishi, Naoya Ikki

  KEYWORDS: Composite, Bending Strength, Vickers Hardness, TiB, NiTi2

  JOURNAL NAME: World Journal of Engineering and Technology, Vol.3 No.3C, October 22, 2015

  ABSTRACT: Composites of NiTi2-TiB have been fabricated using spark plasma sintering and mechanical properties have been investigated. Dense specimens of monolithic NiTi2 have been obtained by the sintering at 950?C. By the x-ray diffraction measurements it has been shown that NiTi2 co-exists with TiB in equilibrium at 950?C. The bending strength of NiTi2-TiB composite increases with increasing the volume fraction of TiB2 up to 60 vol%. The maximum bending strength of 730 MPa has been obtained for NiTi2-60vol% TiB2. The Vickers hardness also increases with increasing the volume fraction of TiB up to 70% and the highest Vickers hardness of 1620 Hv has been obtained for NiTi2-70%TiB.