TITLE:
Hydrodynamic Assessment of Increasing the Energy Efficiency of Trawler Propulsion with a Draft Tube
AUTHORS:
Jonas Eliasson, Elias B. Eliasson, Halldor S. Eliasson
KEYWORDS:
Trawler, Energy Efficiency, Hydrodynamic Assessment, Fuel Economy, Draft Tube
JOURNAL NAME:
Open Journal of Fluid Dynamics,
Vol.5 No.2,
June
2,
2015
ABSTRACT: The economy of the fishing industry is suffering from high fuel prices. Considerable efforts are invested in methods to increase the energy efficiency of fishing vessels and reducing the oil consumption per kilo of catch that may be as high as 0.6 to 0.7 liter oil per kilo catch. It is primarily the fact that sailing and fishing are on two very different speeds that cause these high fuel consumptions. This is called the two-speed problem and it is the trawlers that are hit hardest by it. The essence of the two-speed problem is that a hydraulic efficiency of only 28% can be expected in trawling speed, when it would be 67% if the ship is sailing at optimum speed all the time. Hydrodynamical analysis shows that an average hydraulic efficiency of only 41% can be expected for a trawler. There is no simple remedy for this, but it is possible to use a technology developed in the hydropower industry, i.e. a draft tube, or a diffuser, to recover energy that would otherwise be lost when trawling. A draft of tube the same length as the propellers diameter could mean fuel savings of 10%, a draft tube twice as long 20%. The difficulty is to find a way to get the draft tube out of the water during sailing with a vessel-specific mechanical design that is not a part of the fluid dynamics of the problem and not discussed in the paper.