Article citationsMore>>

Sakamoto, H., Moriya, M., Taniguchi, S. and Arie, M. (1981) Flow around a Normal Plate of Finite Width Immersed in Turbulent Boundary Layer: 1st Report, Pressure and Drag Acting on Plate. Transaction of the Japan Society of Mechanical Engineers, Series B, 48, 1674-1682. (In Japanese)
http://dx.doi.org/10.1299/kikaib.48.1674

has been cited by the following article:

• TITLE: Visualization of a Laminar Necklace Vortex System in Front of a Vertical Rectangular Plate on a Ground Wall

  AUTHORS: Yasuhiro Nakahara, Hidemi Yamada

  KEYWORDS: Flow Visualization, Necklace Vortex System, Rectangular Plate, Laminar Boundary Layer

  JOURNAL NAME: Journal of Flow Control, Measurement & Visualization, Vol.3 No.2, April 15, 2015

  ABSTRACT: Various properties of a necklace vortex system formed around a rectangular plate standing vertically on a flat ground wall were investigated by visualizations produced by injecting fluorescent dye into a water channel flow. As a result, it was found that the necklace vortex pattern had three steady systems depending on the Reynolds number Reh, the relative height h/δ of the rectangular plate compared with the laminar boundary layer thickness and the aspect ratio w/h. As it is expected that the aspect ratio of the rectangular plate will typify the projected area configuration of various three-dimensional bodies, the aspect ratio is varied widely from 0.5 to 7.0. The transitional boundaries of Reh and h/δ in the 2-vortex, 4-vortex and 6-vortex systems for each aspect ratio decreased when w/h