Article citationsMore>>

Wang, S.G., Li, Y.H., Zhao, D., Xu, C.L., Luan, Z.K., Liang, J. and Wu, D.H. (2002) Preparation of Alumina Supported on Carbon Nanotubes and Its Application in Fluoride Adsorption from an Aqueous Solution. Chinese Science Bulletin, 47, 722-724.
http://dx.doi.org/10.1360/02tb9162

has been cited by the following article:

• TITLE: Study the Removal of Fluoride from Aqueous Medium by Using Nano-Composites

  AUTHORS: Tapan K. Rout, Reeta Verma, Robert V. Dennis, Sarbajit Banerjee

  KEYWORDS: Adsorption, Nano-Oxides, Grafted Carbon Fiber, Thermal CVD, Fluoride

  JOURNAL NAME: Journal of Encapsulation and Adsorption Sciences, Vol.5 No.1, March 6, 2015

  ABSTRACT: Endemic fluorosis disease has become a major geo-environmental health care issue caused by fluoride ion. High-efficiency and low-cost materials to uptake fluoride from water have been a chal-lenge for scientists and engineers. Here, we report a low-cost process by utilising low-cost starting materials to develop nanocomposite adsorbents for fluoride uptake from water. Bermuda grass as a starting source material converted into nanocomposite carbon fibers upon heat treatment at 800°C for one hour in Nitrogen atmosphere in the presence of metal oxides. Iron oxide-based nanocomposite (IBNC) is performing high (≈97%) removal of fluoride ion at a contact time of 60 minutes (pH 4) followed by titania-based nanocomposite (TBNC) (≈92%) and micro carbon fiber (≈88%) respectively. The phenomenon of fluoride ion uptake is realised by Freundlich adsorption model, and both adsorption capacity and adsorption intensity for IBNC are higher than those for TBNC and micro carbon fiber.