Article citationsMore>>

Moreno, P., Miró, L., Solé, A., Barreneche, C., Solé, C., Martorell, I. and Cabeza, L.F. (2014) Corrosion of Metal and Metal Alloy Containers in Contact with Phase Change Materials (PCM) for Potential Heating and Cooling Applications. Applied Energy, 125, 238-245.
http://dx.doi.org/10.1016/j.apenergy.2014.03.022

has been cited by the following article:

• TITLE: Time-Temperature Charge Function of a High Dynamic Thermal Heat Storage with Phase Change Material

  AUTHORS: Johannes Goeke, Andreas Henne

  KEYWORDS: Thermal Storage, Phase Change Material (PCM), Plate Heat Exchanger, Dynamic Performance, Storage Charge Function

  JOURNAL NAME: Energy and Power Engineering, Vol.7 No.2, February 25, 2015

  ABSTRACT: A thermal heat storage system with an energy content of 40 kWh and a temperature of 58°C will be presented. This storage system is suitable for supporting the use of renewable energies in buildings and for absorbing solar heat, heat from co-generation and heat pumps or electric heat from excess wind and solar power. The storage system is equipped with a plate heat exchanger that is so powerful that even with small temperature differences between the flow temperature and the storage temperature a high load dynamic is achieved. The storage system has a performance of 2.8 kW at 4 K and 10.6 kW at a temperature difference of 10 K. Thus, large performance variations in solar thermal systems or CHP plants can be buffered very well. Further a storage charge function Q(T, t) will be presented to characterize the performance of the storage.