Article citationsMore>>

Belyakov, A., Kimura, Y. and Tsuzaki, K. (2005) Recovery and Recrystallization in Ferritic Stainless Steel after Large Strain Deformation. Materials Science and Engineering A, 403, 249-259.
http://dx.doi.org/10.1016/j.msea.2005.05.057

has been cited by the following article:

• TITLE: Movement of Dislocations in the Sub-Surface of a Polycrystalline Metal by Cavitation Peening Observed by Transmission Electron Microscopy

  AUTHORS: Osamu Takakuwa, Akihiko Chiba, Hitoshi Soyama

  KEYWORDS: Microstructure, Transmission Electron Microscopy, Dislocation, Surface Modification, Cavitation

  JOURNAL NAME: Materials Sciences and Applications, Vol.6 No.2, January 30, 2015

  ABSTRACT: The impact produced when cavitation bubbles collapse can be utilized to modify surfaces in the same way as shot peening and it is called cavitation peening (CP). CP is one of a number of surface modification techniques used to improve the fatigue strength of metallic materials by introducing compressive residual stress. Although it has been shown by an X-ray diffraction method that CP decreases the micro-strain related to dislocations in the sub-surface of a polycrystalline material, the mechanism for this decrease is unclear. In this paper, the movement of dislocations by CP was observed using transmission electron microscopy (TEM).