Article citationsMore>>

Subrata, M., Asish, B. and Pradip, K. (2011) Ni-Cr-Mo Cladding on Mild Steel Surface Using CO2 Laser and Process Modeling with Response Surface Methodology. International Journal of Engineering Science and Technology, 3, 6805-6816.

has been cited by the following article:

• TITLE: Optimization of Carburized UNS G10170 Steel Process Parameters Using Taguchi Approach and Response Surface Model (RSM)

  AUTHORS: Olawale Samuel Fatoba, Olaitan Lukman Akanji, Abiodun Samson Aasa

  KEYWORDS: ANOVA, S/N Ratios, Taguchi Method, Hardness, RSM, Optimization

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.6, November 10, 2014

  ABSTRACT: The utilization of carburizing materials in surface engineering has undergone many tremendous changes. Effective quality control is possible through carburizing the steel components under op-timal conditions. In this research work, process parameters like furnace temperature, soaking time and particle size of energizer were taken for optimization of carburized UNS-G10170 steel to yield maximum hardness using Taguchi’s design of experiment concepts and Response Surface Model. Nine experimental runs based on Taguchi’s L9 orthogonal array were performed; signal to noise (S/N) ratios, analysis of variance (ANOVA) and regression analysis were used with hardness as response variable. From the optimization and experimental analyses conducted, it was observed that furnace temperature, soaking time and particle size had significant influence in obtaining a better surface integrity. The optimal values obtained during the study optimization by Taguchi approach and Response Surface Model (RSM) were validated by confirmation experiments.