Article citationsMore>>

Yonli, A.H., Khalid, M., Batonneau-Gener, I., Koulidiati, J., Joly, G., Magnoux, P. and Mignard, S. (2011) Removal of Phenolic Pollutants from Water over BEA and HY Zeolites in Batch Conditions. Journal of Chemistry and Chemical Engineering, 5, 429-434.

has been cited by the following article:

• TITLE: α-Endosulfan Removal from Water by Adsorption over Natural Clays from Burkina Faso: An Isothermal Study

  AUTHORS: Arsène H. Yonli, Hermann A. Kabore, Jean Koulidiati

  KEYWORDS: α-Endosulfan, Removal, Water, Natural Clays, Burkina Faso

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.2 No.11, November 10, 2014

  ABSTRACT: The present study carried out the α-endosulfan removal from water by adsorption over natural clays from the western region of Burkina Faso. The adsorption experiments were performed over raw clay samples at room temperature in batch reactor and the obtained adsorption isotherms were well fitted by Fowler-Guggenheim model. It was pointed out for all samples that α-endosulfan was physisorbed in the interlayer space of the clay samples. The maximal adsorption capacities were respectively about 9.12, 6.98 and 4.13 mg/g for KO2, KO1 and KW1 samples. The differences in terms of adsorption capacity for the three samples were due to the presence of illite in the samples KO2 and KO1 when the KW1 sample contained essentially kaolinite in its structure. When the interlayer space was large enough as for samples with illite a greater amount of α-endosulfan molecules were adsorbed. It was also shown that the samples with the higher surface area were the most efficient for the removal of α-endosulfan molecules from water. Moreover, this study exhibited that the α-endosulfan adsorption depended on the crystallites size; the samples presenting largest crystallites had the greatest adsorption capacities.