Article citationsMore>>

Wang, A., Stark, C. and Dumbleton, J.H. (1996) Mechanistic and morphological origins of ultra-high molecular weight polyethylene wear debris in total joint replacement prostheses. Proceedings of the Institution of Mechanical Engineers, Part H: Journal if Engineering in Medicine, 210, 141-156. doi:10.1243/PIME_PROC_1996_210_407_02

has been cited by the following article:

• TITLE: Influence of different CoCrMo counterfaces on wear in UHMWPE for artificial joints

  AUTHORS: Victor A. González-Mora, Michael Hoffmann, Rien Stroosnijder, Eduardo Espinar, José Maria Llamas, Mariano Fernández-Fairén, Francisco Javier Gil

  KEYWORDS: Wear; Artificial Joints; CoCrMo

  JOURNAL NAME: Journal of Biomedical Science and Engineering, Vol.4 No.5, May 17, 2011

  ABSTRACT: Wear tests were carried out to study the effect of various counterface materials in the wear behaviour of Ultra High Molecular Weight Polyethylene (UHMWPE). The materials used as counterfaces were based on varieties of CoCrMo: 1) forged (hand-polished) CoCrMo, 2) forged (mass-finished) CoCrMo, and 3) cast (mass-finished) CoCrMo. Addi-tionally, two coatings were proposed: 1) a CoCrMo coating applied to the forged CoCrMo alloy by means of physical vapour deposition (PVD), and 2) a ZrO2 coating applied to the forged CoCrMo alloy by means of plasma-assisted chemical vapour deposition (PACVD). The reciprocating pin-on-flat (RPOF) de-vice for pin-on-disk wear testing was used for this study. The worn surfaces were observed using optical, atomic force and scanning electron microscopes.