Article citationsMore>>

A. B. Moghaddam, M. R. Ganjali, A. A. Saboury, A. A. Moosavi-Movahedi and P. Norouzi, “Electrodeposition of Nickel Oxide Nanoparticles on Glassy Carbon Surfaces: Application to the Direct Electron Transfer of Tyrosinase,” Journal of Applied Electrochemistry, Vol. 38, No. 9, 2008, pp. 1233-1239. doi:10.1007/s10800-008-9541-3

has been cited by the following article:

• TITLE: Surfactant-Free Production of Ni-Based Nanostructures

  AUTHORS: Yaser Bahari Mollamahaleh, Davood Hosseini, Mehdi Mazaheri, Sayed Khatiboleslam Sadrnezhaad

  KEYWORDS: Nanoparticles, Nickel, Nickel Oxide, Chip-Like Nanoflakes, Solvothermal Technique

  JOURNAL NAME: Materials Sciences and Applications, Vol.2 No.5, May 23, 2011

  ABSTRACT: This paper introduces a facile surfactant-free method for fabrication of different types of Ni-based nanostructures including metallic nickel nanoparticles (MNNP), nickel oxide nanoparticles (NONP) and chip-like nickel oxide nanoflakes (CNONF) by solvothermal technique at 190°C. Nickel acetyl acetonate (Ni(ac ac)2) was used as nickel precursor for both MNNP and CNONF and NiCO3●2Ni(OH)2●nH2O was utilized for NONP. Organic alcohols including 1-hexanol and benzyl alcohol were used as solvent to produce all powders. The crystallite sizes of MNNP, NONP and CNONF were determined by X-ray diffraction (XRD) to be 30, 9 and 27 nm, respectively. Electron microscopy indicated final particle sizes of 80 nm and 20 nm for MNNP and NONP, respectively and a thickness-layer less than 90 nm for CNONF. Brunauer-Emmett-Teller (BET) experiment determined a high surface area of 68 m2/gr for CNONF.