Article citationsMore>>

Rümmeli, M.H., Bachmatiuk, A., Borrnert, F., Schaffel, F., Ibrahim, I., Cendrowski, K., Simha-Martynkova, G., Plachá, D., Borowiak-Palen, E., Cuniberti, G. and Büchner, B. (2011) Synthesis of Carbon Nanotubes with and without Catalyst Particles. Nanoscale Research Letters, 6, 303.
http://dx.doi.org/10.1186/1556-276X-6-303

has been cited by the following article:

• TITLE: The Effect of Carbon Rod—Specimens Distance on the Structural and Electrical Properties of Carbon Nanotube

  AUTHORS: Mohammad M. Uonis, Bassam M. Mustafa, Anwar M. Ezzat

  KEYWORDS: Carbon Nanotubes, Si-CNT Junction, Plasma Sputtering of CNT

  JOURNAL NAME: World Journal of Nano Science and Engineering, Vol.4 No.3, September 5, 2014

  ABSTRACT: The research studies the effect of the distance between the sample and the plasma sputtering source on the properties of the junction (silicon wafer-carbon nanotubes). The silicon wafer is fixed at (near, medium and far distances from the plasma source which is in the form of high purity graphite rod heated electrically). For the three cases, thickness of the sample is constant (20 nm). The samples were studied by scanning electron (SEM) and atomic force microscopes (AFM), X-ray and Raman spectra. For optimum distances the carbon layer is in the form of multi wall carbon nanotube (MWCNT). SEM images shows no formation of CNT on the Si wafer for near distance, which is consistent with the AFM images, X-ray and Raman spectrograms and no existence of characteristics (002) peaks whereas it appears for medium and longer distances, and by experience the optimum distance was found. This means that at closer distance high energy and high intensity plasma particles prevent the formation of CNT. This effect decreases with increasing distance of substrate from the graphite rod.