Article citationsMore>>

Huh, P., Yan, F., Li, L., Kim, M., Mosurkal, R., Samuelson, L.A. and Kumar, J. (2008) Simple Fabrication of Zinc Oxide Nanostructures. Journal of Materials Chemistry, 18, 637-639. http://dx.doi.org/10.1039/b715334a

has been cited by the following article:

• TITLE: Poly(Acrylamide-Co-Acrylic Acid)-Zinc Acetate Polymer Electrolytes: Studies Based on Structural and Morphology and Electrical Spectroscopy

  AUTHORS: Mohd Faiz Hassan, Siti Zulaikha Mohd Yusof

  KEYWORDS: Solution Cast Technique, Solid Polymer Electrolyte, Poly(Acrylamide-Co-Acrylic Acid), Zinc Acetate, Ionic Conductivity, Impedance Spectroscopy, Fourier Infrared Spectroscopy, Scanning Electron Microscopy

  JOURNAL NAME: Microscopy Research, Vol.2 No.2, April 28, 2014

  ABSTRACT: Solid polymer electrolytes (SPEs) of polyacrylamide-co-acrylic acid (PAA) as the polymer host and zinc acetate (ZnA) as an ionic dopant were prepared using a single solvent by the solution casting technique. The amorphous and crystalline structures of film were investigated by X-ray diffraction (XRD). The surface morphology of samples was examined by scanning electron microscopy (SEM). The composition and complex formation of films were characterized by Fourier transform infrared (FTIR) spectroscopy. The conductivity of the PAA-ZnA films was determined by electrochemical impedance spectroscopy. According to the XRD and FTIR analyses, all electrolyte films were in amorphous state and the existence of interaction between Zn2+ cations and the PAA structure confirms that the film was successfully prepared. The SEM observations reveal that the electrolyte films appeared to be rough and flat with irregularly shaped surfaces. The highest ionic conductivity (σ) of 1.82 × 10-5 Scm-1 was achieved at room temperature (303 K) for the sample containing 10 wt % ZnA.