Article citationsMore>>

Mucha, Z., Hoffman, J., Kalita, W. and Mucha, S. (1997) Laser Forming of Thick Free Plates. In: Laser Assisted Net Shape Engineering 2, Proceedings of the LANE, 2, 383-392.

has been cited by the following article:

• TITLE: Numerical Investigation of the Effect of Process and Sheet Parameters on Bending Angle in the Laser Bending Process

  AUTHORS: Mehdi Safari

  KEYWORDS: Laser Bending Process, Numerical Simulation, Process Parameters, Sheet Thickness

  JOURNAL NAME: World Journal of Mechanics, Vol.4 No.4, April 9, 2014

  ABSTRACT: In this work, the effects of process parameters such as laser output power, beam diameter and scan speed and also sheet thickness on the bending angle have been numerically investigated in the laser bending process. For this purpose, Abaqus software is used for investigating the effect of various process and sheet parameters on the bending angle. The results show that with increasing the laser output power, bending angle is increased. Also, the bending angle is decreased with increasing the beam diameter, scan speed and sheet thickness.