Article citationsMore>>

Fedyk, R., Hreniak, D., Lojkowski, W., Strek, W., Matysiak, H., Grzanka, E., Gierlotka, S. and Mazur, P. (2007) Method of Preparation and Structural Properties of Transparent YAG Nanoceramics. Optical Materials, 29, 1252-1257.
http://dx.doi.org/10.1016/j.optmat.2006.05.016

has been cited by the following article:

• TITLE: Spectroscopy and Optical Properties of Sm3+:YAG Nanocrystalline Powder Prepared by Co-Precipitation Method: Effect of Sm3+ Ions Concentrations

  AUTHORS: Hanan Ali, Maram T. H. Abou Kana, Mohamed Atta Khedr

  KEYWORDS: Sm3+; YAG Nanopowders; Concentration Dependence Optical Properties; Ceramics

  JOURNAL NAME: Open Journal of Applied Sciences, Vol.4 No.3, March 11, 2014

  ABSTRACT: Samarium doped Yttrium aluminum garnet (YAG) nanopowders with different concentration (0.5%, 1%, 2%, 3%, 5% and 8% mol) were prepared by simple and low cost co-precipitation method. We found that the precursor begins converting to pure YAG at relatively low temperature around 900°C, and no intermediate phases were detected. The powders annealed at 900°C and 1000°C in air with average particle size around ≈30 nm were characterized by means of X-ray diffraction (XRD) analysis and infrared (IR) spectroscopy. The photoluminescent measurements showed that the reddish-orange (RO) emission transition 4G5/2:6H7/2 is more prominent. In addition, the optimum concentration of doped Sm ions that lead to maximum intensity was reported. Also, fluorescence efficiencies as pumping power dependence for different Sm3+ ions concentrations were explored.