Article citationsMore>>

F. Witte, V. Kaese, H. Haferkamp, E. Switzer, A. MeyerLindenberg, C. J. Wirth and H. Windhagen, “In Vivo corrosion of Four Magnesium Alloys and the Associated Bone Response,” Biomaterials, Vol. 26, No. 17, 2005, pp. 3557-3563. http://dx.doi.org/10.1016/j.biomaterials.2004.09.049

has been cited by the following article:

• TITLE: In Vitro Corrosion and Bioactivity Study of Surface Phytic Acid Modified AZ31 Magnesium Alloy

  AUTHORS: Xu Yang, Lanlan Li, Jian He, Haiying Guo, Jiqiang Zhang

  KEYWORDS: AZ31 Magnesium Alloy; Phytic Acid; Surface Coating; Corrosion; Bioactivity

  JOURNAL NAME: Materials Sciences and Applications, Vol.5 No.2, February 25, 2014

  ABSTRACT: The purpose of the present work was to examine in vitro corrosion and bioactivity of surface phytic acid treatment AZ31 magnesium alloys. Untreated AZ31 magnesium alloys were used as control. The surface morphologies of magnesium alloys were observed by SEM. EDS was used to analyze the surface chemical elemental compositions and elemental concentration distribution. Corrosion properties were evaluated by electrochemical tests. Human osteosarcoma MG-63 cells were used to examine cell viability and proliferation. The results showed that surface phytic acid treatment resulted in a surface coating formation, which did not significantly improve the corrosion resistance of the alloys. The corrosion potential of AZ31 magnesium alloy positive shifted only about 0.04 V (from -1.50 V to -1.46 V); and the corrosion current decreased only 0.354 mA/cm2 (from 2.547 × 10-3 mA/cm2 to 2.193 × 10-3 mA/cm2). However, the cell analysis showed that this coating induced obviously higher MG-63 cell viability and proliferation, and displayed good surface bioactivity.