Article citationsMore>>

Seccombe, J., Lager, A., Jerauld, G., Jhaveri, B., Buikema, T., Bassler, S., Denis, J., Webb, K., Cockin, A., Fueg, E. and Paskvan, F. (2010) Demonstration of low-salinity EOR at interwell-scale, Endicott field, Alaska. 2010 SPE improved Oil Recovery Symposium, Tulsa, 24-28 April 2010, Paper SPE-129692.

has been cited by the following article:

• TITLE: Evaluation of Low Saline “Smart Water” Enhanced Oil Recovery in Light Oil Reservoirs

  AUTHORS: Yogesh Kumar Suman, Ezeddin Shirif, Hussameldin Ibrahim, Abdulsalam Ala-Ktiwi

  KEYWORDS: Low Saline Flooding; EOR; Slug Size; Relative Permeability; Secondary Flooding

  JOURNAL NAME: World Journal of Engineering and Technology, Vol.2 No.1, January 29, 2014

  ABSTRACT: With the depletion of natural driving forces responsible for pushing the oil from reservoirs & declination of oil recovery after secondary stage, the emphasis is now on EOR techniques. The low saline flooding is a type of EOR which gains the attention of researchers due to its easiness to use implications, less cost & environment-friendly nature. Though the low salinity effect has been seen in various labscale core flooding experiments as well as field pilot projects, the mechanism which actually leads to this enhancement in recovery is still the area of research among researchers which is wide open and needs to gain consensus. Seeing the wide mechanisms taking place under different scenarios, it is certain that more than one mechanism is actually supplementing each other in reducing the residual oil saturation while LSW flooding. This study has been undertaken investigations on the low saline flooding in unconsolidated Ottawa sandpack cores with two different, Weyburn & Pelican crude oil, to find out the optimum salinity, LSW Slug Size & underlying mechanisms during LSW flooding. Several core flooding experiments were performed under secondary as well as tertiary recovery stage by unsteady state method. With the reduction of brine salinity from 5000 PPM to 1500 PPM, the oil recovery increased in secondary stage & decreased further upon reduction in salinity to 500 PPM gaining the peak at 1500 PPM. Small enhancement in tertiary recovery of 2.24% observed upon switching to 1500 NaCl PPM brine after injection of formation brine in secondary stage for Weyburn Oil, though large tertiary recoveries of the order of 9.95% for effective oil viscosity of 4 cP and 7.32% for 29.7 cP were observed for n-dodecane diluted Pelican Oil. LSW slug size of 25% pore volume was found to be effective in producing Weyburn Oil in secondary stage.