Article citationsMore>>

H. Tong, T. Ueyama, S. Harada and M. Ushio, “High Speed Welding of Aluminium Alloy Sheets with Using the Laser/AC Pulsed MIG Hybrid Process,” Science and Technology of Welding and Joining, Vol. 8, 2003, pp. 229-234.
http://dx.doi.org/10.1179/136217103225010853

has been cited by the following article:

• TITLE: Improving the Use of Robotic Welding of Aluminum Boats through Modularization

  AUTHORS: Paul Kah, Esa Hiltunen, Jukka Martikainen

  KEYWORDS: Modularization; Modularity; DFMA; Design for Manufacture and Assembly; Aluminum Welding; Robotic Welding; Sub-Assembly; Boat

  JOURNAL NAME: Engineering, Vol.6 No.1, January 15, 2014

  ABSTRACT: The level of automation in the manufacture of recreational aluminum boats is very low. Robotized welding is rarely utilized, although it is commonly considered as the most effective way to reduce costs and increase competitiveness. A reason for the under-exploitation of robotics can be found in the construction of aluminum boats; boat models and their detailed structures are almost without exception individual pieces. A new stiffener structure for an aluminum recreational boat hull is developed in this work. Construction of the stiffener as a module allows exploitation of the advantages of modularization. The number of different parts is reduced and the structure simplified improves the applicability of robotic welding and provides benefits accruing from mass production. The same module can be used in several boat models. The modularity also makes it possible to use the same advanced robot welding fixture for a variety of boat models.